Skip to main content

Multiple Systems Configured

Depending on the purchased license's type, you can configure one or more than one Vantage system.
If multiple systems are configured (you have properly loaded graphics files for those systems), the system selection screen will appear as shown below:

On the bottom bar, click on the system you wish to view it.

If more than four systems are configured, the bottom bar will display only the last four systems used, ordering them by the last use.

To access the other configured systems, swipe down or click the top-right icon.

The following images illustrate this option.

Go to operator mode (multiple systems case)​

If you need to go to the Operator Mode screens, you need to exit from the Vantage Touchscreen view, and go to operator mode.

1. Exit from the Vantage Touchscreen view:​

  • (Option 1) Swipe down
  • (Option 2) Press and hold on the screen for 6 seconds

Now you should be on the system selection screen.

2. Go to operator mode:​

  • Perform an horizontal swipe on the screen Left <-- Right